Zoom ICON

Yukon Gear and Axle

U-joints - 1330 (FDHC-YUJ7438)

ITEM# FDHC-YUJ7438

Availability: IN STOCK

Verify fitment with your vehicle
GO
Clear
$53.89
Adding to cart… The item has been added
Note: Free shipping is only available when full cart value exceed’s $100.
SHARE ON SOCIAL MEDIA:
Get FREE Shipping on orders above $100
NEED ANY GUIDANCE?
Connect with an expert for your assistance.
WARNING: Products sold on this website can expose you to chemicals that are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
  • Units are inspected to ensure precise accuracy and fitment
  • Yukon products are held to the highest quality standards in the industry
  • Engineered using state-of-the-art design software
    • Year
    Make
    Model
    Notes
    1968 - 1970
    American Motors
    AMX
    AMC Model 35
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1978 - 1983
    American Motors
    Concord
    AMC Model 35
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1980 - 1988
    American Motors
    Eagle
    AMC Model 35
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1970 - 1977
    American Motors
    Hornet
    AMC Model 35
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1968 - 1974
    American Motors
    Javelin
    AMC Model 35
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1980
    American Motors
    Pacer
    AMC Model 35
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1964 - 1970
    Buick
    Wildcat
    GM 12 Bolt Passenger Car
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1964 - 1972
    Chevrolet
    Bel Air
    GM 12 Bolt Passenger Car
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1964 - 1972
    Chevrolet
    Biscayne
    GM 12 Bolt Passenger Car
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1969 - 1974
    Chevrolet
    Blazer
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1969 - 1974, 1987
    Chevrolet
    Blazer
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1986
    Chevrolet
    C10
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1968
    Chevrolet
    C10 Pickup
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1972
    Chevrolet
    C10 Pickup
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1963 - 1974
    Chevrolet
    C10 Pickup
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1972
    Chevrolet
    C10 Suburban
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1964 - 1972
    Chevrolet
    C20 Pickup
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1984 - 1985, 1992 - 1994
    Chevrolet
    Camaro
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1972
    Chevrolet
    Camaro
    GM 12 Bolt Passenger Car
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1966 - 1970
    Chevrolet
    Caprice
    GM 12 Bolt Passenger Car
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1964 - 1973
    Chevrolet
    Chevelle
    GM 12 Bolt Passenger Car
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1964 - 1968
    Chevrolet
    Chevy II
    GM 12 Bolt Passenger Car
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1965 - 1972
    Chevrolet
    El Camino
    GM 12 Bolt Passenger Car
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2003 - 2009
    Chevrolet
    Express 2500
    Dana Super 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2003 - 2009
    Chevrolet
    Express 3500
    Dana Super 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1981
    Chevrolet
    G10
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1972
    Chevrolet
    G10 Van
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1968 - 1972
    Chevrolet
    G10 Van
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1974
    Chevrolet
    G10 Van
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1987
    Chevrolet
    G30
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1964 - 1972
    Chevrolet
    Impala
    GM 12 Bolt Passenger Car
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1980
    Chevrolet
    K10
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1986
    Chevrolet
    K10
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1960 - 1972
    Chevrolet
    K10 Pickup
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1961 - 1974
    Chevrolet
    K10 Pickup
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1972
    Chevrolet
    K10 Pickup
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1963 - 1974
    Chevrolet
    K10 Pickup
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1980
    Chevrolet
    K10 Suburban
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1972
    Chevrolet
    K10 Suburban
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1986
    Chevrolet
    K10 Suburban
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1980
    Chevrolet
    K20
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1962 - 1974
    Chevrolet
    K20 Pickup
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1980
    Chevrolet
    K20 Suburban
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1972
    Chevrolet
    K20 Suburban
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1977 - 1980
    Chevrolet
    K30
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1977 - 1986
    Chevrolet
    K30
    Dana 60; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1968 - 1974
    Chevrolet
    K30 Pickup
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1971 - 1974
    Chevrolet
    K30 Pickup
    Dana 60; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1980
    Chevrolet
    K5 Blazer
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1986
    Chevrolet
    K5 Blazer
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1970 - 1972
    Chevrolet
    Monte Carlo
    GM 12 Bolt Passenger Car
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1969 - 1972
    Chevrolet
    Nova
    GM 12 Bolt Passenger Car
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1987
    Chevrolet
    R10
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1960 - 1966
    Chevrolet
    Suburban
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1964 - 1966
    Chevrolet
    Suburban
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1963 - 1966
    Chevrolet
    Suburban
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1987
    Chevrolet
    V10
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1987 - 1988
    Chevrolet
    V10 Suburban
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1987 - 1988
    Chevrolet
    V30
    Dana 60; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2007 - 2009
    Chrysler
    Aspen
    Chrysler 8.25 in.; C213R/C213RE
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1980
    Dodge
    B100
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1971 - 1974
    Dodge
    B100 Van
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1980
    Dodge
    B200
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1971 - 1974
    Dodge
    B200 Van
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1981 - 1994
    Dodge
    B250
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1995 - 1998
    Dodge
    B2500
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1980
    Dodge
    B300
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1971 - 1974
    Dodge
    B300 Van
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1981 - 1994
    Dodge
    B350
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1995 - 1998
    Dodge
    B3500
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1966 - 1974
    Dodge
    Charger
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1980
    Dodge
    D200
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1968 - 1974
    Dodge
    D200 Pickup
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1960 - 1967
    Dodge
    D200 Series
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1981 - 1993
    Dodge
    D250
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1980
    Dodge
    D300
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1968 - 1974
    Dodge
    D300 Pickup
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1960 - 1967
    Dodge
    D300 Series
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1981 - 1993
    Dodge
    D350
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2005 - 2010
    Dodge
    Dakota
    Chrysler 8.25 in.; C213R/C213RE
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1968 - 1976
    Dodge
    Dart
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2005 - 2009
    Dodge
    Durango
    Chrysler 8.25 in.; C213R/C213RE
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2007 - 2011
    Dodge
    Nitro
    Chrysler 8.25 in.; C213R/C213RE
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1994 - 2001
    Dodge
    Ram 1500
    Dana 44; Disconnect Design
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2004 - 2006
    Dodge
    Ram 1500
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1994 - 2002
    Dodge
    Ram 2500
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1994 - 2002
    Dodge
    Ram 2500
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1994 - 2002
    Dodge
    Ram 2500
    Dana 60; Disconnect Design
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1999 - 2003
    Dodge
    Ram 2500 Van
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1994 - 2002
    Dodge
    Ram 3500
    Dana 60; Disconnect Design
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1999 - 2003
    Dodge
    Ram 3500 Van
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1984 - 1993
    Dodge
    Ramcharger
    Dana 44; Disconnect Design
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1974 - 1993
    Dodge
    Ramcharger
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1993
    Dodge
    Ramcharger
    Dana 60; Disconnect Design
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1977, 1984 - 1989
    Dodge
    W100
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1968 - 1974
    Dodge
    W100 Pickup
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1960 - 1967
    Dodge
    W100 Series
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1985 - 1993
    Dodge
    W150
    Dana 44; Disconnect Design
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1977 - 1985
    Dodge
    W150
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1980
    Dodge
    W200
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1980
    Dodge
    W200
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1980
    Dodge
    W200
    Dana 60; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1968 - 1974
    Dodge
    W200 Pickup
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1968 - 1974
    Dodge
    W200 Pickup
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1960 - 1967
    Dodge
    W200 Series
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1963 - 1967
    Dodge
    W200 Series
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1981 - 1993
    Dodge
    W250
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1981 - 1993
    Dodge
    W250
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1981 - 1993
    Dodge
    W250
    Dana 60; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1987 - 1993
    Dodge
    W250
    Dana 61
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1980
    Dodge
    W300
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1980
    Dodge
    W300
    Dana 60; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1968 - 1974
    Dodge
    W300 Pickup
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1968 - 1974
    Dodge
    W300 Pickup
    Dana 60; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1960 - 1967
    Dodge
    W300 Series
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1960 - 1967
    Dodge
    W300 Series
    Dana 60; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1981 - 1993
    Dodge
    W350
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1981 - 1993
    Dodge
    W350
    Dana 60; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1987 - 1993
    Dodge
    W350
    Dana 61
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1980 - 1996
    Ford
    Bronco
    Dana 44; IFS
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1978 - 1979
    Ford
    Bronco
    Dana 44; Reverse Rotation; Straight Axle
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1971 - 1977
    Ford
    Bronco
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1983 - 1996
    Ford
    Bronco
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1992 - 2011
    Ford
    Crown Victoria
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1969 - 1975
    Ford
    E-100 Econoline
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1983
    Ford
    E-100 Econoline
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2008 - 2013
    Ford
    E-150
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2003 - 2014
    Ford
    E-150
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1979
    Ford
    E-150 Econoline
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1983 - 2002
    Ford
    E-150 Econoline
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1969 - 1974
    Ford
    E-200 Econoline
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2003 - 2014
    Ford
    E-250
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1980 - 2002
    Ford
    E-250 Econoline
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1983
    Ford
    E-250 Econoline
    Dana 61
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1985 - 1998
    Ford
    E-250 Econoline
    Ford 10.25 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1983 - 1998
    Ford
    E-250 Econoline
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1969 - 1974
    Ford
    E-300 Econoline
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1998
    Ford
    E-350 Econoline
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1981 - 1987
    Ford
    E-350 Econoline
    Dana 61
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1985 - 1998
    Ford
    E-350 Econoline
    Ford 10.25 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1999
    Ford
    E-350 Econoline Club Wagon
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2000 - 2015
    Ford
    E-350 Super Duty
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2000 - 2002
    Ford
    E-450 Econoline Super Duty
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2003 - 2008
    Ford
    E-450 Super Duty
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1997 - 2001
    Ford
    Expedition
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1991 - 2001
    Ford
    Explorer
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2001 - 2005, 2007 - 2010
    Ford
    Explorer Sport Trac
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1966 - 1979
    Ford
    F-100
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1966 - 1976
    Ford
    F-100
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1965 - 1971
    Ford
    F-100
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1978
    Ford
    F-150
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1980 - 1996
    Ford
    F-150
    Dana 44; IFS
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1976 - 1979
    Ford
    F-150
    Dana 44; Reverse Rotation; Straight Axle
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1976 - 1977
    Ford
    F-150
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2000 - 2004
    Ford
    F-150
    Ford 10.25 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1983 - 2009
    Ford
    F-150
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1980 - 1990
    Ford
    F-250
    Dana 44; IFS
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1979
    Ford
    F-250
    Dana 44; Reverse Rotation; Straight Axle
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1966 - 1977
    Ford
    F-250
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1980 - 1998
    Ford
    F-250
    Dana 50; IFS
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1954 - 1986
    Ford
    F-250
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1978 - 1999
    Ford
    F-250
    Dana 60; Reverse Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1974 - 1982
    Ford
    F-250
    Dana 61
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1985 - 1998
    Ford
    F-250
    Ford 10.25 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1999 - 2013
    Ford
    F-250 Super Duty
    Dana 60; Reverse Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1999
    Ford
    F-250 Super Duty
    Ford 10.25 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979
    Ford
    F-350
    Dana 44; Reverse Rotation; Straight Axle
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1980 - 1986
    Ford
    F-350
    Dana 50; IFS
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1978
    Ford
    F-350
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1997
    Ford
    F-350
    Dana 60; Reverse Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1978 - 1985
    Ford
    F-350
    Dana 61
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1985 - 1997
    Ford
    F-350
    Ford 10.25 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1999 - 2015
    Ford
    F-350 Super Duty
    Dana 60; Reverse Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1999
    Ford
    F-350 Super Duty
    Ford 10.25 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2000 - 2004
    Ford
    F-450 Super Duty
    Dana 60; Reverse Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2000 - 2004
    Ford
    F-550 Super Duty
    Dana 60; Reverse Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1978 - 1983
    Ford
    Fairmont
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1982
    Ford
    Granada
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1986
    Ford
    LTD
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1987 - 1991
    Ford
    LTD Crown Victoria
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 2014
    Ford
    Mustang
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1990 - 2011
    Ford
    Ranger
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1987 - 1988
    Ford
    Thunderbird
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1978
    GMC
    C15
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1978
    GMC
    C15 Suburban
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1968
    GMC
    C15/C1500 Pickup
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1972
    GMC
    C15/C1500 Pickup
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1974
    GMC
    C15/C1500 Pickup
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1972
    GMC
    C15/C1500 Suburban
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1974
    GMC
    C15/C1500 Suburban
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1986
    GMC
    C1500
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1986
    GMC
    C1500 Suburban
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1972
    GMC
    C25/C2500 Pickup
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1978
    GMC
    G15
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1972
    GMC
    G15/G1500 Van
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1974
    GMC
    G15/G1500 Van
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1964 - 1966
    GMC
    G1500
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1964 - 1966, 1979 - 1987
    GMC
    G1500
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1978
    GMC
    G25
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1974
    GMC
    G25/G2500 Van
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1981
    GMC
    G2500
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1978
    GMC
    G35
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1973 - 1974
    GMC
    G35/G3500 Van
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1991
    GMC
    G3500
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1978
    GMC
    K15
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1978
    GMC
    K15
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1978
    GMC
    K15 Suburban
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1978
    GMC
    K15 Suburban
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1966 - 1972
    GMC
    K15/K1500 Pickup
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1966 - 1974
    GMC
    K15/K1500 Pickup
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1972
    GMC
    K15/K1500 Pickup
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1966 - 1974
    GMC
    K15/K1500 Pickup
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1974
    GMC
    K15/K1500 Suburban
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1972
    GMC
    K15/K1500 Suburban
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1974
    GMC
    K15/K1500 Suburban
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1980
    GMC
    K1500
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1986
    GMC
    K1500
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1980
    GMC
    K1500 Suburban
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1985
    GMC
    K1500 Suburban
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1978
    GMC
    K25
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 1978
    GMC
    K25 Suburban
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1974
    GMC
    K25/K2500 Pickup
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1974
    GMC
    K25/K2500 Suburban
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1967 - 1972
    GMC
    K25/K2500 Suburban
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1980
    GMC
    K2500
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1980
    GMC
    K2500 Suburban
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1977 - 1978
    GMC
    K35
    Dana 60; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1971 - 1974
    GMC
    K35/K3500 Pickup
    Dana 60; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1986
    GMC
    K3500
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1986
    GMC
    K3500
    Dana 60; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1987
    GMC
    R1500
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1987
    GMC
    R1500 Suburban
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2003 - 2013
    GMC
    Savana 2500
    Dana Super 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2003 - 2010
    GMC
    Savana 3500
    Dana Super 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1960 - 1966
    GMC
    Suburban
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1963 - 1966
    GMC
    Suburban
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1987
    GMC
    V1500
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1987
    GMC
    V1500 Suburban
    GM 12 Bolt Truck
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1987
    GMC
    V3500
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1987
    GMC
    V3500
    Dana 60; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1968 - 1971
    International
    Scout
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1971 - 1980
    International
    Scout II
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1971 - 1980
    International
    Scout II
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1993 - 1997
    Isuzu
    Rodeo
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1984 - 2001
    Jeep
    Cherokee
    AMC Model 35
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1986 - 1993
    Jeep
    Cherokee
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1960 - 1983
    Jeep
    CJ5
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1966 - 1975
    Jeep
    CJ6
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1971 - 1975
    Jeep
    CJ6
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1986
    Jeep
    CJ7
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1986 - 1992
    Jeep
    Comanche
    AMC Model 35
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1986 - 1992
    Jeep
    Comanche
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1986 - 1992
    Jeep
    Comanche
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1966 - 1973
    Jeep
    Commando
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2007 - 2011
    Jeep
    Compass
    Chrysler 8.25 in.; C213R/C213RE
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1993 - 1998
    Jeep
    Grand Cherokee
    AMC Model 35
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2005 - 2010
    Jeep
    Grand Cherokee
    Chrysler 8.25 in.; C213R/C213RE
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1993
    Jeep
    Grand Wagoneer
    AMC Model 35
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1984 - 1991
    Jeep
    Grand Wagoneer
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1984 - 1991, 1993
    Jeep
    Grand Wagoneer
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1974 - 1978
    Jeep
    J10
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1974 - 1988
    Jeep
    J10
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2005 - 2012
    Jeep
    Liberty
    Chrysler 8.25 in.; C213R/C213RE
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1981 - 1986
    Jeep
    Scrambler
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1971 - 1990
    Jeep
    Wagoneer
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1974 - 1990
    Jeep
    Wagoneer
    Dana 44; Standard Rotation
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1963 - 1976
    Jeep
    Wagoneer
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1987 - 1995, 1997 - 2006
    Jeep
    Wrangler
    AMC Model 35
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1997 - 2006
    Jeep
    Wrangler
    Dana 44
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2003 - 2005
    Lincoln
    Aviator
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1980, 1982 - 1987
    Lincoln
    Continental
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2006 - 2008
    Lincoln
    Mark LT
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1980 - 1983
    Lincoln
    Mark VI
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1984 - 1992
    Lincoln
    Mark VII
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1993 - 1998
    Lincoln
    Mark VIII
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1998 - 2002
    Lincoln
    Navigator
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1981 - 2011
    Lincoln
    Town Car
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1994 - 2008
    Mazda
    B3000
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1994 - 2007
    Mazda
    B4000
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1991 - 1994
    Mazda
    Navajo
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1986
    Mercury
    Capri
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1979 - 1988
    Mercury
    Cougar
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1975 - 2011
    Mercury
    Grand Marquis
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2003 - 2004
    Mercury
    Marauder
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1997 - 2010
    Mercury
    Mountaineer
    Ford 8.8 in.
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1968 - 1974
    Plymouth
    Barracuda
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1970 - 1976
    Plymouth
    Duster
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1968 - 1974
    Plymouth
    Fury
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1968 - 1971
    Plymouth
    GTX
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1968 - 1975
    Plymouth
    Road Runner
    Dana 60
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1969 - 1972
    Pontiac
    Firebird
    GM 12 Bolt Passenger Car
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    1970 - 1972
    Pontiac
    GTO
    GM 12 Bolt Passenger Car
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.
    2011
    Ram
    Dakota
    Chrysler 8.25 in.; C213R/C213RE
    1330 U/Joint; with zerk fitting. Two caps are 1-1/8 in. diameter and two caps are 1-1/16 in. diameter.

    Related Products

    !